If you have spent any time on a UAE construction site in the last ten years, you already know that AAC blocks have almost completely replaced traditional concrete blocks for internal walling work. Walk through any villa project in Dubai Hills, any apartment development in Abu Dhabi, or any commercial fit-out in Sharjah — the lightweight grey blocks with their honeycomb texture are everywhere.
But prices vary significantly across UAE suppliers, block sizes, and densities — and most contractors waste money either buying the wrong specification or paying retail prices when factory-direct rates are available. This guide gives you real 2026 AAC block prices in the UAE, a breakdown of where to buy, and everything you need to order correctly first time.
Exeed Litecrete AAC blocks — the most widely used AAC block brand in the UAE, manufactured in Abu Dhabi.
AAC Block Price in UAE 2026 — By Size
| Block Size | Price Per Block (AED) | Price Per m² (AED) | Common Use |
|---|---|---|---|
| 600×200×200mm (Full Block) | AED 3.50 – 5.50 | AED 28 – 44 | External and internal walls — most common UAE spec |
| 600×200×100mm (Half Block) | AED 2.00 – 3.50 | AED 32 – 56 | Internal partition walls, bathroom walls |
| 600×300×200mm (Thick Block) | AED 5.50 – 8.00 | AED 37 – 54 | External walls with higher thermal requirement |
| 600×200×150mm (Mid Block) | AED 2.80 – 4.20 | AED 28 – 42 | Internal walls where 200mm is too thick |
| 600×200×75mm (Thin Block) | AED 1.50 – 2.50 | AED 27 – 45 | Bathroom partitions, duct enclosures |
| Hollow Concrete Block (Comparison) | AED 1.50 – 3.00 | AED 19 – 38 | Boundary walls, load-bearing (not AAC) |
Prices are August 2026 UAE market rates. Bulk orders (5,000+ blocks) typically attract 10–20% discounts from factory-direct suppliers.
AAC Block Price by Supplier Type — UAE 2026
| Supplier Type | Price per 600×200×200mm Block | Best For |
|---|---|---|
| Factory Direct (Exeed Litecrete, Abu Dhabi) | AED 3.20 – 4.00 | Large projects 10,000+ blocks — Abu Dhabi |
| Factory Direct (DAS International, Dubai) | AED 3.50 – 4.50 | Large projects 5,000+ blocks — Dubai |
| Local Building Materials Merchant | AED 4.50 – 6.00 | Medium projects, Sharjah Industrial Area |
| Online Supplier (FEPY, UAE) | AED 4.00 – 6.50 | Small orders, nationwide UAE delivery |
| Retail Hardware Store | AED 6.00 – 10.50 | Emergency small quantities only |
💡 Key UAE Buying Tip
Always get a delivered price — not an ex-factory price. Transport from Mussafah (Abu Dhabi) to a Dubai site adds AED 0.50–1.00 per block for small loads. For 10,000 blocks that is AED 5,000–10,000 in hidden transport costs. Compare delivered prices across suppliers before ordering.
Why UAE Contractors Use AAC Blocks Instead of Concrete Blocks
The switch from hollow concrete blocks to AAC in UAE residential and commercial construction happened gradually between 2005 and 2015, and by now it is complete for most internal walling applications. The reasons are not complicated.
In a country where air conditioning accounts for 60-70% of building energy consumption, the thermal insulation properties of AAC blocks are genuinely significant. A 200mm AAC block wall has a thermal resistance roughly 8-10 times higher than the equivalent hollow concrete block wall. For a Dubai villa running air conditioning for 10 months of the year, that difference is measurable in the electricity bill.
The weight difference also matters on site. A standard 600×200×200mm AAC block weighs approximately 12-14kg depending on density — compared to 20-25kg for a hollow concrete block of similar size. For a masonry worker laying 100 blocks a day, that weight reduction reduces fatigue significantly and improves laying speed.
AAC blocks delivered and stacked on a UAE construction site.
AAC blocks being laid with thin-bed adhesive mortar — 2-3mm joints only.
AAC Block vs Hollow Concrete Block — Which is Right for Your UAE Project?
AAC block (left) vs hollow concrete block (right) — the key differences that matter in UAE construction.
✅ USE AAC BLOCKS FOR
- All internal walls in UAE buildings
- External walls where thermal insulation matters
- Anywhere AC cost reduction is a priority
- High-rise where weight reduction matters
- Areas needing fire resistance
- Anywhere noise reduction is required
❌ DO NOT USE AAC FOR
- Boundary walls exposed to weather
- Below-ground retaining walls
- Load-bearing structural walls (without engineer approval)
- Areas with heavy impact risk
- Anywhere constantly wet
AAC Block Sizes — Which to Specify for Your UAE Project
| Application | Recommended Size | Reason |
|---|---|---|
| UAE External Walls | 200mm thick AAC | UAE Green Building thermal requirement met |
| Internal Room Divisions | 100mm or 150mm AAC | Space saving, lighter, faster to lay |
| Bathroom & WC Walls | 100mm AAC | Sufficient for non-structural partitions |
| Duct & Shaft Enclosures | 75mm or 100mm AAC | Lightweight, easy to cut around services |
| Boundary Walls | Hollow concrete — NOT AAC | AAC not suitable for exposed boundary walls |
| Load Bearing Walls | Engineer specification | Standard AAC is non-load bearing only |
What Mortar to Use with AAC Blocks in UAE
This is one of the most common mistakes on UAE sites. Standard cement mortar (1:4 or 1:6 mix) used for hollow concrete blocks is the wrong product for AAC blocks. The correct product is thin-bed AAC mortar — applied at 2-3mm joint thickness only, compared to 10-15mm for standard mortar.
Using standard cement mortar with AAC blocks defeats the thermal insulation purpose of the block — the thick mortar joints conduct heat directly through the wall. It also increases material cost significantly. Always specify thin-bed AAC adhesive mortar when ordering AAC blocks from your supplier.
Calculate How Many AAC Blocks You Need
Before ordering, use our free UAE block calculator to get the exact quantity of AAC blocks for your wall area — including mortar joints and 10% wastage allowance. Getting this number right before ordering saves you from costly over-ordering or the disruption of running short mid-project.
Frequently Asked Questions
What is the price of AAC block in UAE in 2026?
Standard 600×200×200mm AAC blocks in UAE cost between AED 3.50 and AED 5.50 per block from building materials merchants. Factory-direct from Exeed Litecrete (Abu Dhabi) or DAS International (Dubai) for large orders: AED 3.20–4.50 per block. Retail hardware stores: up to AED 10.50 per block. Always get a delivered price and compare across at least 3 suppliers.
What is the difference between AAC block and hollow block in UAE?
AAC (autoclaved aerated concrete) blocks are lightweight, thermally insulating, and fire resistant. Hollow concrete blocks are denser, heavier, stronger in compression, and cheaper per block. AAC is used for internal walls and insulated external walls. Hollow concrete is used for boundary walls, retaining walls, and load-bearing applications.
Which AAC block brand is best in UAE?
Exeed Litecrete is the leading UAE-manufactured AAC block brand, produced in Abu Dhabi and widely trusted by UAE contractors and consultants. For standard villa and apartment projects, Exeed Litecrete offers the best combination of price, availability, and technical support in the UAE.
How many AAC blocks per m² of wall?
Standard 600×200×200mm AAC block: 8.33 blocks per m² of wall (theoretical). With 2-3mm thin-bed mortar joints: approximately 8.0 blocks per m². Add 10% for cutting wastage. For a 100m² wall area order approximately 880 blocks. Use our free block calculator for accurate quantities.
Can AAC blocks be used for external walls in UAE?
Yes — 200mm AAC blocks are widely used for external walls in UAE and meet UAE Green Building Regulation thermal requirements. Ensure the external face is rendered with a cement-based render and painted with a weatherproof exterior paint. Do not leave AAC blocks exposed to UAE weather without render.
Where to buy AAC blocks in Dubai?
In Dubai, AAC blocks are available from DAS International (main distributor), building materials merchants in Al Quoz Industrial Area and Jebel Ali, and online suppliers with UAE-wide delivery. For large orders (5,000+ blocks) contact DAS International directly for factory pricing and scheduled site delivery.
🧮 Free UAE Building Calculators
AAC block prices listed are based on UAE market data collected in August 2026. Prices vary by supplier, order volume and delivery location. Always confirm current rates with your local supplier before ordering.